Dell Emulex Family of Adapters - Manual (Page 1192)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
5. Managing Hosts
Viewing Information and Driver Parameters in a Host
1192
Function Summary Area

NIC Functions – The number of NIC functions running on the discovered
adapters on this host.
FC/FCoE

FC Functions – The number of FC functions running on the discovered adapters
on this host.

FCoE Functions – The number of FCoE functions running on the discovered
adapters on this host.

FC Targets – The number of FC targets discovered on the FC/FCoE functions on
this host.
iSCSI

iSCSI Functions – The number of iSCSI functions running on the discovered
adapters on this host.

iSCSI Targets –The number of iSCSI targets discovered on the iSCSI functions
on this host.
Viewing Driver Parameters of All Adapters in a Host
The host Driver Parameters tab enables you to view and edit the adapter driver
parameter settings for a specific host. The host driver parameters are global values and
apply to all adapters in that host unless they are overridden by parameters assigned to
a specific adapter using the port Driver Parameters tab. For each parameter, the
information pane shows the current value, the range of acceptable values, the default
value, and whether the parameter is dynamic. A dynamic parameter allows the change
to take effect without resetting the adapter or rebooting the system. For information on
changing parameters for the host, refer to “Viewing Firmware Information for All
Adapters in a Host” on page 51.
Note: If there are no discovered FC or FCoE adapters, the driver parameters table is
empty. This occurs because there are no adapters to which the host driver
parameters apply.
To view driver parameters for all adapters in a host:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. Select the Driver Parameters tab.