Showing the global reactivation delay default, Creating a team – Dell Emulex Family of Adapters User Manual
Page 798
OneCommand NIC Teaming and VLAN Manager User Manual
P009415-01A Rev. A
5. OneCommand NIC Teaming Manager Command Line Interface
The Command Reference
798
Used VLAN IDs:
101, 102, 103
Available VLAN IDs:
VLAN_Native, 1-100, 104-4094
Showing the Global Reactivation Delay Default
Syntax
show reactdelay
Parameters
None.
Description
This command shows the global default reactivation delay that is used when creating
teams. The default delay value is 30 seconds and is shown in milliseconds.
Example
c:\Program Files\Emulex\NIC Teaming>OcTeamCmd.exe show reactdelay
Default reactivation delay: 30 seconds
Creating a Team
Caution:
Creating a team may take several seconds. Large configurations make take
several minutes. Prematurely cancelling this operation may result in partial
removal of a team or VLAN, which may lead to future teaming issues
including system instability.
Note: Adapters, teams and VLANs that have been disabled in Network Connections
or Device Manager cannot be managed by the NIC Teaming Manager and may
not be visible to the NIC Teaming Manager. Make sure that any affected
adapters, teams and VLANs are enabled before making any NIC Teaming
configuration changes.
Note: For a complete list of notes for creating a team, see “Creating, Configuring, and
Syntax
create team
802.3ad:<hash> | LACP: