Dell Emulex Family of Adapters - Manual (Page 1368)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1368

For FCoE ports, this command only resets the driver to update changed
driver parameters that require a driver reset. It does not cause a hardware
reset of the adapter port.
Parameters
restorewwn
Syntax
elxvcpcmd.exe v= u= p=
restorewwn
Description
This command restores the WWN value of the specified port.
Parameters
saveconfig
Note: Driver parameters that are set temporarily and globally (using the G and T
flags) must be read using the getdriverparamsel xvcpcmd command to view the
current value of the parameter. The getdriverparamsglobal elxvcpcmd
command returns only permanently set driver parameter values. Additionally,
if temporary, global values have been set for one or more driver parameters, the
saveconfig elxvcpcmd command must be run with the N flag (using the N flag
is analogous to the elxvcpcmd command getdriverparams) to force the driver
parameter values for the specified adapter to be saved. Inaccurate values may
be saved if the G flag is used for this command.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
RestoreType
Valid types are:
0 = Restore Default WWNs
1 = Restore NVRAM WWNs