Dell Emulex Family of Adapters - Manual (Page 940)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
940
2002: Error Could not grow rpi count
An error occurred because the RPI count could not be increased.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2004: Failed to allocate XRI.last XRITAG is Max XRI is , Used
XRI is .
All XRIs are in use.
Data: None
Severity: Warning
Log:
LOG_SLI
Action: None required.
2005: Unable to deregister pages from HBA:
The SGL pages could not be unregistered from the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2007: Only Limited Edition cmd Format supported
The SGL pages could not be unregistered from the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2008: Error posting all rpi headers
The RPI headers could not be posted to the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2009: Failed to allocate mbox for ADD_FCF cmd
Failed to allocate mailbox for ADD_FCF command.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2010: Resume RPI Mailbox failed status , mbxStatus
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)