Dell Emulex Family of Adapters - Manual (Page 1261)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
OCe10100–Series and OCe11100–Series Adapters
1261
Viewing OCe10100–Series and OCe11100–Series Adapter
Firmware Information
Unlike LightPulse adapters, OCe10100-series and OCe11100-series adapter firmware is
maintained on an adapter-specific basis instead of port-specific basis.
To view firmware information for an adapter:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the adapter for which you
want to view firmware information.
3. Select the Maintenance tab. The Maintenance tab enables you to view and update
firmware on an adapter in a specific host.
Figure 6-48 OCe11100-Series Adapter Maintenance Tab
Maintenance Tab Field Definitions

Active Firmware Version – The firmware version currently being used by the
adapter.

Flash Firmware Version – The flash firmware version flashed on the adapter.

BIOS Version – The version of the BIOS currently being used by the adapter.

Boot Code Versions – The adapter's boot code versions currently being used by
the adapter.
Note: The Start-up Boot Code is the boot code that boots the adapter. It has no
relation to the FC, or PXE boot code versions.