Dell Emulex Family of Adapters - Manual (Page 1666)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring MPIO
1666
3. Install third-party MPIO software for your operating system.
4. Configure the second path to a single boot LUN through the Emulex iSCSI
configuration utility.
To configure MPIO:
1. From the Controller Configuration Menu screen, select MPIO Configuration and
press .
Figure 12-3 Controller Configuration Menu Screen with MPIO Configuration Setting Highlighted
2. From the MPIO Configuration pop-up menu, select Enable or Disable and press
.
3. To save your changes, select Save Changes and press .