Dell Emulex Family of Adapters - Manual (Page 1154)

CIM Provider Package Installation Guide P010091-01A Rev. A
3. Using the Adapter
Executing a Diagnostic Test
1154
4. Start the CIMOM and enumerate the Emulex classes in the “root/emulex”
namespace.
5. Perform the operation which is not working as expected. The provider logs are
available in specified in step 2.
6. Contact an Emulex technical support representative with the provider logs and the
system logs (/var/log/syslog.log).
Executing a Diagnostic Test
Executing a Diagnostic Test with an Emulex UCNA Adapter
To execute a diagnostic test with the Emulex CIM Provider:
1. Get the instance of the managed element (ethernet port). For example:
wbemcli -noverify ein
‘https://root:@/root/emulex:elxucna_ethernetport’
-nl
2. Get the instance of the ELXUCNA_DiagnosticTest class. For example:
wbemcli -noverify ein
‘https://root:@/root/emulex:elxucna_diagnostictest
’ -nl
3. Invoke the method RunDiagnosticservice on the elxucna_diagnostictest. For
example:
wbemcli -noverify cm
‘https://root:@/root/emulex:
instance from step 2>’
RunDiagnosticservice.ManagedElement=
from step 1>’
4. A CIM_ConcreteJob instance is created for each diagnostic test run. For example:
wbemcli -noverify ein
‘https://root:@/root/emulex:elxucna_concretejob’
-nl
5. Results of the diagnostic test runs are available in
ELXUCNA_DiagnosticCompletionRecord class instances. For example:
wbemcli -noverify ein
‘https://root:@/root/emulex:elxucna_diagnosticcomp
letionrecord’ -nl
6. The diagnostic logs can be cleared using the ClearLog function of
ELXUCNA_DiagnosticsLog class. For example:
wbemcli -noverify cm
‘https://root:@/root/emulex:
Diagnostic log instance>’ ClearLog