Dell Emulex Family of Adapters - Manual (Page 1803)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix I. Booting the Solaris Operating System from the Network on SPARC Systems
1803
Appendix I. Booting the Solaris Operating
System from the Network on
SPARC Systems
To boot the Solaris operating system from the network on SPARC systems:
1. Set up the Jumpstart server and automated install (AI) server.
2. Obtain the MAC address of the ELXNIC port used for the net boot:.
a. Get the device path of the port from the show-devs command:
{0} ok show-devs
/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1
/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0
b. Select the OCE device to boot:
{0} ok " /pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1" select-dev
c. Get the MAC address of the selected device from its properties:
{0} ok .properties
vf-assigned-addresses c3030000 00000041 00060000 00000000 00004000
assigned-addresses c3030010 00000041 00000000 00000000 00004000
c3030018 00000041 00020000 00000000 00020000
c3030020 00000041 00040000 00000000 00020000
82030030 00000000 00100000 00000000 00080000
vf-reg 43030000 00000000 00000000 00000000 00004000
model OCe14102-N
fw-ver 10.2.107.1
mac-address 00 90 fa 41 3b 40
local-mac-address 00 90 fa 41 3b 40
fcode-version 10.2.12.0
reg 00030000 00000000 00000000 00000000 00000000
03030010 00000000 00000000 00000000 00004000
03030018 00000000 00000000 00000000 00020000
03030020 00000000 00000000 00000000 00008000
02030030 00000000 00000000 00000000 00040000
compatible pciex10df,720.10df.e800.10
pciex10df,720.10df.e800
pciex10df,720.10
pciex10df,720
pciexclass,020000
pciexclass,0200
max-frame-size 000005ee
address-bits 00000030
supported-network-types Ethernet,10000,null,full
copyright Copyright (c) 2009-2013 Emulex. All rights reserved.
name oce
device_type Network
manufacturer Emulex
fcode-ver 1.00a1