Dell Emulex Family of Adapters - Manual (Page 673)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
673
Discovery Log Messages (0202–0262)
lpfc_mes0202: Start Discovery: Link Down Timeout: x%x, initial
PLOGICount:%d
lpfc_mes0204: Discovered SCSI Target: WWN word 0: x%x, WWN word 1:
x%x, DID: x%x:, RPI: x%x
lpfc_mes0214: RSCN received: Word count:%d
lpfc_mes0215: RSCN processed: DID: x%x
Description Device discovery/rediscovery after FLOGI, FAN
or RSCN has started. TMO is the current value of
the soft link time. It is used for link discovery
against the LinkDownTime set in parameters.
DISC CNT is number of nodes being discovered
for link discovery. RSCN CNT is number of
nodes being discovered for RSCN discovery.
There will be value in either DISC CNT or RSCN
CNT depending on which discovery is being
performed.
Severity Information
Log
LOG_DISCOVERY verbose
Action No action needed, informational.
Description Device discovery found SCSI target.
Severity Information
Log
LOG_DISCOVERY verbose
Action No action needed, informational.
Description Received RSCN from fabric.
Severity Information
Log
LOG_DISCOVERY verbose
Action No action needed, informational.
Description Processed RSCN from fabric.
Severity Information
Log
LOG_DISCOVERY verbose
Action No action needed, informational.