Dell Emulex Family of Adapters - Manual (Page 1372)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1372
Examples
Mixed Mode
elxvcpcmd.exe v=10.192.000.000 u=root p=vmware h=10.192.000.000
setadapterportconfig 00-00-c9-12-34-56 p0=nic,iscsi p1=nic,fcoe p2=nic,fcoe
p3
=nic
elxvcpcmd.exe v=10.192.000.000 u=root p=vmware h=10.192.000.000
getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 4
Maximum FCoE Functions : 4
Maximum iSCSI Functions : 4
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : No
RebootRequired : Yes
Active Configuration
Profile ID : 37
MCType : None
Port Assignments:
Port 0: NIC,iSCSI
Port 1: NIC,FCoE
Port 2: NIC,iSCSI
Port 3: NIC,FCOE
Reboot Configuration
Profile ID : 37
MCType : None
Port Assignments:
Port 0 (p0): NIC,iSCSI
Port 1 (p1): NIC,FCoE
Port 2 (p2): NIC,FCoE
Port 3 (p3): NIC,None
Note: (pN) labels are the port parameter names to use in the
pid
Optionally specifies the profile ID to use for the personality. This
parameter is required for NIC only.
Type
Optional multichannel type specification (specify none to disable
multichannel). This parameter is required to specify multichannel. If
not specified, no change to the configured multichannel type is made.
State
NParEP Mode state. This parameter can only be specified when
mctype=NPar.
Valid states are:
0 = Disabled
1 = Enabled