Dell Emulex Family of Adapters - Manual (Page 950)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
950
2558: ADD_FCF_RECORD mailbox failed with status add_status
The ADD_FCF_RECORD mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2559: Block sgl registration required DMA size great than a page.
Attempting to register more SGEs with the firmware than can fit in a page.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2560: Failed to allocate mbox cmd memory\n
Failed to allocate mailbox command memory.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2561: Allocated DMA memory size () is less than the requested DMA
memory size ()
Could not get the memory required for the number of XRIs that are attempting to be posted.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2562: No room left for SCSI XRI allocation
max_xri=, els_xri=n
The number of allocated XRIs has reached the max_xri value.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2563: Failed to allocate memory for SCSI XRI management array of size
.
Initialization could not allocate memory to hold the XRIs.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2564: POST_SGL_BLOCK mailbox command failed status add_status
mbx status
The list of XRI SGEs failed to be registered with the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)