Dell Emulex Family of Adapters - Manual (Page 1715)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
14. Troubleshooting
Troubleshooting for the iSCSI Protocol
1715
Troubleshooting for the iSCSI Protocol
The following section includes troubleshooting information for the iSCSISelect utility.
Ensure that you also lookup the readme.txt file located on CD1 for the most current
troubleshooting issues.
PXE-E77: Bad or missing
discovery server list. There are two possible reasons.
One is that Multicast and
Broadcast discovery are both
disabled. The other is that
Multicast and Broadcast are
enabled, but the server list tag is
not found or is invalid.
PXE-E78: Could not locate boot
server.
PXE-E79: NBP is too big to fit in
free base memory. The NBP file size is larger than the
free base memory. Check the NBP file size.
Miscellaneous Error Codes
PXE-EA0: Network boot
cancelled by keystroke Pressing and during
DHCP discovery.
Table 14-1 PXE Error Codes (Continued)
Error Codes Possible Reason Comment/Solution
Table 14-2 Troubleshooting the iSCSISelect Utility
Issue Answer/Solution
iSCSI BIOS banner is not displayed
during system post. • Check the motherboard BIOS configuration and make sure that
the Option ROM is enabled and is set for the PCIe slot into
which the adapter is inserted.
• If the Option ROM is enabled and is set for the PCIe slot into
which the adapter is inserted and the issue persists, erase the
Controller Configuration. For more information, see “Erasing
the Current Configuration” on page 1609.