Dell Emulex Family of Adapters - Manual (Page 1384)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1384
Note: The retention count applies to all adapters in the server.
Parameters
setvccred
Syntax
elxvcpcmd.exe setvccred v= u= p=
Description
While executing a set of CLI commands, you need to enter vCenter credentials
repeatedly. By executing the “setvccred” command first, you can save these credentials
including vCenter server name/IP, username and password to a file in an encrypted
format and execute subsequent commands without use of vCenter credentials.
Using this command is optional. You can continue to execute the commands providing
all credentials.
Note: This command does not apply to ports or adapters.
Parameters
Example
Execute setvccred first:
elxvcpcmd.exe setvccred v=12.345.678.901 u=username p=password
Subsequent commands can be:
New format:
elxvcpcmd.exe h=12.345.678.123 listhbas
-or-
Old Format:
elxvcpcmd.exe v=12.345.678.901 u=username p=password h=12.345.678.123
listhbas
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
RetentionCount
The number of dump files to retain.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.