Dell Emulex Family of Adapters - Manual (Page 1054)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1054
ACTION: This error could indicate a firmware or hardware issue. Report these errors to
Emulex technical support.
elx_mes0323: Unknown Mailbox command Cmpl
DESCRIPTION: A unknown mailbox command completed.
DATA: None
ACTION: This error could indicate a software driver, firmware or hardware issue.
Report these errors to Emulex technical support.
elx_mes0324: Config port initialization error, mbxCmd
READ_NVPARM, mbxStatus
DESCRIPTION: A read nvparams mailbox command failed during port configuration.
DATA: None
ACTION: This error could indicate a software driver, firmware or hardware issue.
Report these errors to Emulex technical support.
elx_mes0330: IOCB wake NOT set
DESCRIPTION: The completion handler associated with the IOCB was never called.
DATA:(1) timeout, (2) timeleft/jiffies
ACTION: This error could indicate a software driver, firmware or hardware issue. If
the issue persists, report the error to Emulex technical support.
elx_mes0332: IOCB wait issue failed, Data
DESCRIPTION: Driver issued I/O failed to complete in polling mode.
DATA: (1) error value.
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes0334: Unknown IOCB command
DESCRIPTION: Received an unknown IOCB command completion.
DATA: (1) type, (2) ulpCommand, (3) ulpStatus, (4) ulpIoTag, (5) ulpContext)
ACTION: This error could indicate a software driver or firmware issue. If these issues
persist, report these errors to Emulex technical support.
elx_mes0335: Unknown IOCB command
DESCRIPTION: Received an unknown IOCB command completion.
DATA: (1) ulpCommand, (2) ulpStatus, (3) ulpIoTag, (4) ulpContext)
ACTION: This error could indicate a software driver or firmware issue. If these issues
persist, report these errors to Emulex technical support.