Dell Emulex Family of Adapters - Manual (Page 724)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix B. Configuring iSCSI through DHCP
Dynamic Host Configuration Protocol (DHCP) Recommendations
724
The following is an example of default TCP port and mutual-CHAP settings:
iscsi:"192.168.0.2"::"000000000000000E":"iqn.2009-4.com:1234567890"
::"E":"D":"M"

Target IP address: 192.168.0.2

Target TCP port: Use default from RFC 3720 (3260)

Target boot LUN: 0x0E

Target iqn name: iqn.2009-04.com:1234567890

Initiator name: Not specified. Use the initiator name that is already configured,
or use the default name if no initiator name is already configured.

Header digest: Enabled

Data digest: Disabled

Authentication type: Mutual-CHAP