Dell Emulex Family of Adapters - Manual (Page 301)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
2. Installing and Uninstalling the CLI
Linux
301
libhbaapi Library
The inbox libhbaapi library is required on RHEL 5, RHEL 6, and SLES 11.

For i386 RHEL 5 and RHEL 6, use the 32bit libhbaapi RPM.

For x86_64 RHEL 5 and RHEL 6, use the 64bit libhbaapi RPM.

For PPC RHEL 5 use the 32bit libhbaapi RPM.

For PPC RHEL 6 use the 64bit libhbaapi RPM.
For existing systems, before installing the OneCommand Manager CLI, download the
appropriate Linux driver from the Emulex website, and install it. If specified, also
download and install the appropriate library file. For example,

On OneConnect FCoE adapters:

For RHEL 5 and SLES 10 operating systems, use Linux driver version
8.2.0.33.3p, or later.

For RHEL 6 (and later versions) and SLES 11 SP1 (and later versions)
operating systems, use Linux driver version 8.3.5. Also, the RHEL 6
Enterprise kit requires the installation of the libstdc++-5.so library. This
library is available through the compat-libstdc++-33-3.2.3-68..rpm or
later. The PPC64 and x86_64 builds require the 64-bit version installed,
which is installed in /usr/lib64. The i386 build requires the 32-bit version
installed which is installed in /usr/lib.

On OneConnect NIC adapters (including iSCSI-NIC and FCoE-NIC adapters),
use the NIC driver.
To install the OneCommand Manager CLI in Linux without an existing OneCommand
CLI:
1. Copy the applications kit tar file to a directory on the installation machine.
2. Change to the directory where you copied the tar file.
3. Untar the file:
tar zxvf elxocmcore---.tgz
4. Change to the core kit directory created in step 3.
cd elxocmcore---
5. Run the install.sh script.
./install.sh
Note: install.sh can also be run in non-interactive (quiet) mode. Enter the
following command to view the syntax:
./install.sh --help
The core kit consists of three or four rpm files for each supported architecture and
each supported version of Linux. For example:

elxocmlibhbaapi-*.rpm (on 64-bit platforms that support 32-bit applications,
there are two of these files)

elxocmcore-*.rpm

elxocmcorelibs-*.rpm