beautypg.com

Pinging a target, Figure 12-18 – Dell Emulex Family of Adapters User Manual

Page 1683

background image

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual

P010097-01B Rev. A

12. Configuring UEFI for iSCSI

Adding and Configuring Targets

1683

Note: When you configure the CHAP parameters, verify that those parameters

match the parameters on the storage side.

4. Select Save/Login and press .

Pinging a Target

Note: If you want to verify that you can connect to a target before you log in, you must

ping the target before you configure the target on the Edit/Ping Target screen.

To ping a target:
1. On the iSCSI Target Configuration screen, select the target name and press .

The Edit/Ping Target screen is displayed.

Figure 12-18 Edit/Ping Target Screen

See also other documents in the category Dell Computer hardware: