Dell Emulex Family of Adapters - Manual (Page 1095)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1095
elx_mes1821: Create VPORT failed. Invalid WWN format
DESCRIPTION: The port could not be created due to an invalid WWNN or WWPN
format.
DATA: None
ACTION: Provide a valid WWN when creating VPorts.
elx_mes1822: Invalid :
DESCRIPTION: An invalid WWN was used when creating a VPort.
DATA: (1) type_name, (2) wwn[1], (3) wwn[3], (3) wwn[5], (4) wwn[7]
ACTION: When creating a VPort you must furnish a valid WWN.
elx_mes1823: Create VPORT failed. Duplicate WWN on HBA.
DESCRIPTION: The port could not be created because it would duplicate an existing
WWNN adapter address. The resources for the port had to be discarded.
DATA: None
ACTION: Provide a WWN that is unique.
elx_mes1825: Vport Created.
DESCRIPTION: This message is displayed to indicate that a port was created in the
system. It is displayed at this level to ensure it is always appears at all log levels.
DATA: None
ACTION: No action, informational.
elx_mes1826: Vport Disabled.
DESCRIPTION: The port had to be disabled in the system.
DATA: None
ACTION: No action, informational.
elx_mes1827: Vport Enabled.
DESCRIPTION: The port had to be enabled after possible recovery from some errors.
DATA: None
ACTION: No action, informational.
elx_mes1828: Vport Deleted.
DESCRIPTION: A VPort was deleted.
DATA: None
ACTION: No action, informational.