Dell Emulex Family of Adapters - Manual (Page 327)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Help
327
Help
The Help command displays command information for the HbaCmd application.
Without using its optional parameters, the Help command lists all the commands in
their respective groups. Using the optional parameter, GroupName, it lists the
commands in a group. Using the optional parameter, CmdName, it shows the details
for a specific command.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
Help [GroupName] [CmdName]
Parameters
Example 1
This help command example lists all the commands in their respective groups:
hbacmd help
The example output:
Usage: hbacmd version
or hbacmd { h=IPv4 Address{:port} | Hostname{:port} }
or hbacmd { h={[}IPv6 Address{]:port}
Note: When specifying IPv6 address with port option, it must be
enclosed in []. Example: [fe80::6445:80e9:9878:a527]:9876
Use the following syntax for issuing CIM based commands (IPv4 only):
A> hbacmd [u=userid][p=password][n=namespace]
B> hbacmd
Before specifying syntax B, the user should do one of the following:
1. Add the host IP with CIM credentials using the AddHost command.
e.g. hbacmd [u=userid] [p=password] [n=namespace] AddHost
2. Set the default CIM credentials using the SetCimCred command.
e.g. hbacmd SetCimCred
Use the following syntax to specify Secure Management credentials:
hbacmd [h=IP Address[:port]]
Command Summary
Help Commands
Help
Group: {AdapterLicense, Attributes, Authentication, Boot, CM, DCB,
GroupName
This optional parameter lists the commands in a particular group.
CmdName
This optional parameter shows the details for a particular CLI command.