Dell Emulex Family of Adapters - Manual (Page 207)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OneConnect Adapters
207
4. When the AdapterID and Entitlement Code are successfully validated, download a
License Key File containing one or more activation keys.
5. Using the Install Feature Licenses dialog box, enter the name of the License Key File
(or click Browse to use a file browser to find the file) and click OK.
6. A dialog box appears confirming that you want to install the licenses. Click OK.
7. A dialog box appears notifying you that the installation was successful or why it
failed. Click OK.
Changing Personalities on OneConnect OCe10102 and
OCe11102 Adapters
The OneCommand Manager application enables you to change the personality or
protocol running on OneConnect OCe10102 and OCe11102 adapters.
When you change the personality of the adapter and reboot the host, the adapter starts
running the new personality or protocol. The personalities that OCe10102 and
OCe11102 adapters currently run are NIC-Only, NIC + FCoE, and NIC + iSCSI. In some
cases the adapters are pre-configured to support multiple personalities. In other cases
you must install a license key before the adapter can support multiple personalities. See
“Showing and Installing Licenses for OneConnect OCe10102 and OCe11102 Adapters”
on page 204 for more information.
Note: The three different personalities may not always be available on an adapter. For
example, a NIC + FCoE adapter can change to a NIC-Only or NIC + iSCSI
adapter, but an iSCSI adapter may not be able to change to a NIC + FCoE
adapter.
Use the Adapter Information tab to make personality changes.