Dell Emulex Family of Adapters - Manual (Page 485)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Running the Standalone Adapter Management Utility
485

For example, starting an Offline Adapter Management Utility with
script1.txt in the c:\test directory:
oslpcfg @C:\test\script1.txt
Note: To redirect screen output to a file, add at the end of each command.
For example:
oslpcfg listboot n=1 >result.out
Note: For more information on script files, see “Creating Script Files” on page 507 and
“Script File Commands” on page 508.
Running the Standalone Adapter Management Utility
The Standalone Adapter Management Utility allows you to update firmware on
Emulex adapters without needing to install any tools. No drivers are included in the
Standalone kit. No applications are installed because the utility runs from inside the kit.
The Standalone Adapter Management Utility has the same capability as the Offline
Adapter Management Utility, except that you use the following scripts to run the
utility:

Windows – winlpcfg.bat and elxflash.bat

Linux – linplcfg.sh and elxflash.sh
Windows
1. Extract kit contents.
2. Change directory (cd) to elxflashStandalone-windows-.
The following directories should be present:

boot\

firmware\

win\
3. For Elxflash, copy firmware images to the firmware directory. Copy boot images to
the boot directory.
Note: For Elxflash, each operating system architecture directory includes a
fwmatrix.txt file. You must use the fwmatrix.txt directory that matches the
current operating system architecture.
4. Change directory (cd) to the win directory.
The following files and directories should be present:

win32\

x64\

elxflash.bat

winlpcfg.bat