Dell Emulex Family of Adapters - Manual (Page 1360)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1360
hbaattributes
Syntax
elxvcpcmd.exe v= u= p=
hbaattributes
Description
This command shows a list of all adapter attributes for the specified port on the
adapter. This command is supported only at the host level.
Parameters
installadapterlicense
Syntax
elxvcpcmd.exe v= u= p=
h= installadapterlicense [Licence File Path]
Description
This command shows a list of the manageable Emulex adapters found by remote
out-of-band (TCP/IP) discovery. For NIC ports, instead of the port WWPN, the MAC
address is displayed. The node WWPN and fabric WWPN are not displayed.
Parameters
Note: The InstallAdapterLicense command applies to UCNAs only.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
Licence File Path
The local file path of the license file to be installed.