Dell Emulex Family of Adapters - Manual (Page 496)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Viewing Adapter Information
496
Viewing the MAC Address (listmac)
This command shows the MAC address of a NIC UCNA port.
To view the MAC address of a NIC UCNA port, type
oslpcfg listmac n=
Sample response:
adapter 2: NIC Permanent MAC 00-00-c9-5b-3a-f4 MAC 00-00c9-5b3ac2
Viewing Firmware Program Revisions (listrev)
This command shows the firmware versions in the adapter’s flash memory, specified
by their numbers.
To show revisions, type
oslpcfg listrev n=
The following example lists information for adapter #3:
oslpcfg listrev n=3
Sample response:
Viewing Selected Configuration Regions (readconfig)
This command shows the contents of the selected configuration region up to the
initialized length or the specified byte count (if the initialized length is less than the
specified byte count). Valid region numbers are 0 to 32. You must initialize the
configuration region first by writing data to it.
Chipset Rev:
BIU: 1001206D
SM FW: 0BC12792
FW Rev:
Current FW: SLI-3 Overlay
Kernel Rev: FFC01213
Kernel LP110021.20a3
Init FW: LP11002Init Load 2.72a2
(BS2.72A2)
SLI-2: LP11002Overlay 2.72a2
(B2F2.72A2)
SLI-3: LP11002Overlay 2.72a2
(B3F2.72A2)
FC-PH Version Supported:
Highest FC-PH Version Supported = 4.3
Lowest FC-PH Version Supported = 4.3
Feature Availability = 0000 00ef