Dell Emulex Family of Adapters - Manual (Page 1665)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring MPIO
1665
The Controller Configuration Menu screen is displayed.
Figure 12-2 Controller Configuration Menu Screen
2. Highlight iSCSI Initiator Name and press to edit the initiator name.
This is a global setting. The initiator name configured on one adapter is reflected on
all adapters in the system.
Note: HP systems are an exception to the previous statement. Each port on an HP
system can be configured with a unique initiator name.
3. To save changes, select Save Changes and press .
Configuring MPIO
MPIO support allows the initiator to log in dual sessions to the same target. In this way
I/O can be sent over either TCP/IP connection to the target. If one session fails another
session can continue processing I/O without interruption to the application. In iSCSI
target configuration, you have the option of setting dual network paths to a single boot
LUN.
Note: Although MPIO boot support allows the initiator to log into multiple sessions,
the iSCSI BIOS currently limits the number of sessions to two iSCSI sessions for
a single boot LUN.
You must follow these steps in this order to configure MPIO boot support for each
operating system.
1. Use the Emulex iSCSI configuration utility to configure the first path to a boot
target.
2. Complete normal operating system installation.