Dell Emulex Family of Adapters - Manual (Page 1087)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1087
ACTION: None required.
elx_mes1309: Link Down Event received Data
DESCRIPTION: The port generated a link down event to the host.
DATA: (1) fc_eventTag (2)port_state (3) VPort fc_flag
ACTION: None required.
elx_mes1310: Link Up Event npiv not supported in loop topology
DESCRIPTION: Loop topologies are not supported when NPIV is enabled.
DATA: None
ACTION: Put link into Fabric mode.
Port Setup Events (1400 - 1499)
elx_mes1400: Failed to initialize sgl list.
DESCRIPTION: Failed to initialize SGL list during initialization.
DATA: None
ACTION: Reboot the server. If the issue persist, contact Emulex technical support.
elx_mes1401: Failed to enable pci device.
DESCRIPTION: Failed to enable PCI device during initialization.
DATA: None
ACTION: Reboot the server. If the issue persist, contact Emulex technical support.
elx_mes1402: Failed to set up pci memory space.
DESCRIPTION: PCI initialization failed.
DATA: None
ACTION: Reboot the server. If the issue persist, contact Emulex technical support.
elx_mes1403: Failed to set up driver resource.
DESCRIPTION: Driver resource initialization failed.
DATA: None
ACTION: None required.
elx_mes1404: Failed to set up driver resource.
DESCRIPTION: Driver resource initialization failed.
DATA: None
ACTION: None required.