Dell Emulex Family of Adapters - Manual (Page 767)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
3. Using the OneCommand NIC Teaming and VLAN Manager
Creating, Configuring, and Removing Teams
767

The primary adapter is labeled “Marked as Primary” and is at the top of the list
in the Team Members area. If this is the adapter that you want to be primary,
click Create Team.

To change the primary adapter, select the adapter in the Team Members area
and click Set Primary. The new primary adapter will display at the top of the
adapter list and be marked as primary. Click Create Team.
An Operation in Progress message is displayed.
Note: You can change the primary adapter after a team is created. See “Modifying a
Team” on page 767.
Note: Use the latest available drivers for third party adapters; otherwise,
unpredictable results may occur.
Modifying a Team
1. From the Start menu, click All Programs>Emulex>OneCommand Teaming and
VLAN Manager to start the application.
2. Select the team in the discovery-tree.
3. Select the Modify Team tab.
Figure 3-10 Modify Team Tab
4. Make changes to the team:

To add a secondary adapter from the discovery-tree, select one or more
adapters and click
. If this button is not active, you cannot add the
adapter. This could be due to the team type you have selected.

To remove an adapter, in the Team Members area, select one or more
adapters. The
button is active. Click this button to mark the adapter for