Dell Emulex Family of Adapters - Manual (Page 376)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
376
Syntax
AddTargetPortal [ImmediateData=<0|1>]
[HeaderDigest=<0|1>] [DataDigest=<0|1>] [Auth=<0|1|2> "TgtCHAPName"
"TgtSecret" "InitCHAPName" "InitSecret"]
Parameters
CleariSNSServer
This command clears the configured iSNS server and disables iSNS target discovery. If
no iSNS server is currently configured or if two or more iSNS servers are defined, any
attempt to use this command returns an error.
Note: This command works only if one iSNS server is defined.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
CleariSNSServer
Parameters
MAC_Address
The MAC address of an iSCSI port.
Target_IP
IP address of the target portal. You can specify an IPv4 or IPv6 IP
address.
Port
Port number of the target portal (value: 1024-65535).
ImmediateData
0 = No
1 = Yes (default)
HeaderDigest
0 = None (default)
1 = CRC32C
DataDigest
0 = None (default)
1 = CRC32C
Auth
0 = None (default)
1 = One-Way CHAP
2 = Mutual CHAP
TgtCHAPNam
Target CHAP name enclosed in quotes (string length: 1-256).
TgtSecret
Target Secret enclosed in quotes (string length: 12-16).
InitCHAPName
Initiator CHAP name enclosed in quotes (string length: 1-256).
InitSecret
Initiator Secret enclosed in quotes (string length: 12-16).
MAC_Address
The MAC address of an iSCSI port.