Dell Emulex Family of Adapters - Manual (Page 929)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
929
1250: Menlo command error. code=<#>
The IOCB driver sent to check FCoE state has bad header size.
Data: (1) return code
Log: LOG_LINK_EVENT
Severity: Error
Action:
Try resetting the FCoE to operational mode.
1251: Menlo command error. code=<#>
The IOCB driver sent to check FCoE state has failed, no resources.
Data: (1) return code
Log: LOG_LINK_EVENT
Severity: Error
Action:
Try resetting the FCoE to operational mode.
1252: Menlo command error. code=<#>
The IOCB driver sent to check FCoE state has failed.
Data: (1) return code
Log: LOG_LINK_EVENT
Severity: Error
Action:
Try resetting the FCoE to operational mode.
1257: lpfc_menlo_issue_iocb: handler set for .
Data: None
Log: LOG_LIBDFC
Severity: Warning
Action:
None required.
1259: mbox: Issued mailbox cmd while in stopped state.
Only the dump mailbox command and reset adapter mailbox command are allowed when in the
stopped state.
Data: None
Severity: Warning
Log:
LOG_MBOX
Action: None required.
1262: Failed to allocate dfc_host
Could not allocate memory the dfc_host_struct.
Data: None
Log: LOG_LIBDFC
Severity: Error
Action:
None required.
1268: Find ndlp returned NULL for oxid:x%x SID:x%x, oxid, sid.(int)off, rc.
Could not find the node for this DID.
Data: None
Severity: Warning
Log:
LOG_ELS
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)