Dell Emulex Family of Adapters - Manual (Page 493)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Viewing Adapter Information
493
Viewing Boot Device Information (readbootdevice)
This command shows the WWN, the LUN (in decimal format), and the topology in use
for the currently selected boot device.
To show this information, type
oslpcfg readbootdevice n=
The following example reads WWN and LUN for adapter #1:
oslpcfg readbootdevice n=1
Viewing BootBIOS Versions (listboot)
This command lists all the BootBIOS versions, with indices (base 1) and code names,
which are loaded in the flash of the adapter and specified by its number. If the selected
adapter does not have any BootBIOS loaded, it returns error code 39.
Note: Because this application uses base 1 indices, if you had three ports in the
application they would be port 1, port 2, and port 3.
To list BootBIOS versions, type
oslpcfg listboot n=
The following example lists BootBIOS versions that are loaded on adapter #3:
oslpcfg listboot n=3
Viewing Adapter Attributes (hbaattr)
This command displays adapter information.
To list the adapter attributes for all installed adapters, type
oslpcfg hbaattr
To list the adapter attributes for one adapter, type
oslpcfg hbaattr n=
Sample response:
oslpcfg hbaattr n=5
Command: hbaattr n=5
HBA : 5
Permanent Mac : 00:00:C9:D5:6A:4B
Function Type : iSCSI
Device ID : 0712
Vendor ID : 19A2
Sub Device ID : E702
Sub Vendor ID : 10DF
V1 :Emulex LightPulse LPe16002-M6-D 2-Port 16Gb Fibre Channel
Adapter
V2 :LPe16002-M6-D
Command completed, NO Error