Dell Emulex Family of Adapters - Manual (Page 1191)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
5. Managing Hosts
Viewing Information and Driver Parameters in a Host
1191
5. Managing Hosts
Viewing Information and Driver Parameters in a Host
Viewing Information for a Single Host
To view host information:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab. The Host Information tab is selected by default and the information of the
selected host appears.
Figure 5-1 Host Information Pane
Host Information Field Definitions

Host Name – The host identifier.

Number of Adapters – The number of adapters installed in the host.

Number of Fabrics – The number of fabrics to which the host is connected.

Operating System – The operating system and version installed on the selected
host.

Lock Down Mode – Indicates whether lockdown mode is enabled or disabled.

IP Address – The IP address of the host.

Number of Ports – The number of discovered physical ports that can be
managed by this host.

Number of Target Ports – The number of targets discovered across the ports.

CIM Provider Versions – The version of the Emulex CIM Providers that are
running on the ESXi host.