Dell Emulex Family of Adapters - Manual (Page 1171)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
2. Installing and Uninstalling OneCommand Manager for VMware vCenter Components
Installing OneCommand Manager for VMware vCenter
1171
Figure 2-4 Register/Unregister Dialog Box
11. Enter the following details of the vCenter Server:

vCenter Server Name – The IP address of the vCenter Server.

vCenter Server HTTPS Port – The HTTPS port number of the vCenter Server.
Note: The vCenter Server HTTPS port is by default 443. You can change this
value if you have configured a different HTTPS port while installing the
vCenter.

Username – The user with required privileges.

Password – The user password.
12. Click Register to register OneCommand Manager for VMware vCenter with a new
vCenter Server.
Notes:

You can unregister an existing OneCommand Manager for VMware
vCenter by clicking Unregister.

If you change the host name of the machine hosting the plug–in server, you
should re-install the plug–in server and re-register.
13. When the operation is successful, a message is displayed. Click OK.
14. Close the browser window. The Installation completed window appears. Click
Finish. An OneCommand Manager for VMware vCenter Registration icon is
created on the desktop. You do not need to reboot the system.