Dell Emulex Family of Adapters - Manual (Page 1230)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
iSCSI Port
1230
iSCSI Initiator Login Options Tab Field Definitions
iSCSI Names Area

Initiator iSCSI Name – The iSCSI qualifier name of the initiator.

Initiator Alias – An optional non-unique string used to identify the initiator.
Initiator Login Options Area

Immediate Data – If set to Yes, the initiator can append unsolicited data to an
iSCSI command.

Header Digest – If set to CRC32C, the integrity of an iSCSI PDU's header
segments are protected by a CRC32C checksum. If set to None, the PDU’s
header segments are not protected.

Data Digest – If set to CRC32C, the integrity of an iSCSI PDU's data segment is
protected by a CRC32C checksum. If set to None, the PDU’s data segments are
not protected.
Authentication Area

Authentication Method

One-Way CHAP requires only that the authenticator (iSCSI target)
authenticate the iSCSI initiator.

Mutual CHAP requires that both the iSCSI target and iSCSI initiator
authenticate each other.

None indicates that no authentication is performed.

Target CHAP Name – The iSCSI login name sent by the initiator to the target for
authentication. This name is required for both One-Way CHAP and Mutual
CHAP authentication. The target CHAP name is also known as the username.

Target Secret – The iSCSI login secret sent by the initiator to the target for
authentication. A target secret is required for both One-Way CHAP and Mutual
CHAP authentication.

Initiator CHAP Name – The iSCSI login name sent by the target to the initiator
for authentication. The initiator CHAP name is only required for Mutual CHAP
authentication. The initiator CHAP name is also known as the username.

Initiator Secret – The iSCSI login secret sent by the target to the initiator for
authentication. The initiator secret is only required for Mutual CHAP
authentication.
iSCSI Initiator Login Options Tab Buttons

View Default Login Options – Click to show the Initiator Default Login Options
window.