beautypg.com

Dell Emulex Family of Adapters User Manual

Page 923

background image

Emulex Drivers Version 10.2 for Linux User Manual

P010081-01A Rev. A

4. Troubleshooting

Log Messages

923

1029: Reauthentication Failure

The driver encountered errors and there was a failure to re-authenticate.

Data:

None

Severity: Error
Log:

LOG_SECURITY

Action:

Software driver Error. If this issue persists, report errors to the Technical Support.

1031: Start Authentication: Get config failed

The authentication failed due to some error during port configuration.

Data:

None

Severity: Error
Log:

LOG_SECURITY

Action:

Software driver Error. If this issue persists, report errors to the Technical Support.

1032: Start Authentication: get config timed out

The node authentication was aborted because waiting for port configuration to complete, timed
out.

Data:

None

Severity: Error
Log:

LOG_SECURITY

Action:

Software driver Error. If this issue persists, report errors to the Technical Support.

1033: Received auth_negotiate from Nport: < nlp_DID>

Unsolicited authentication negotiation message received from a port.

Data:

(1) nlp_DID

Severity: Warning
Log:

LOG_SECURITY

Action:

No action, this message is informational.

1034: Not Expecting Challenge - Rejecting Challenge

Unsolicited authentication challenge received from a port, was rejected.

Data:

None

Severity: Warning
Log:

LOG_SECURITY

Action:

Software driver warning. If this issue persists, report errors to the Technical Support.

elx_mag1036: Authentication transaction reject - re-auth request reason

exp

An authentication was rejected and requested again due to reason as displayed with explanation.

Data:

(1) reason (2) explanation.

Severity: Error
Log:

LOG_SECURITY

Action:

Software driver Error. If this issue persists, report errors to the Technical Support.

1037: Authentication transaction reject - restarting authentication, reason

exp

An authentication process was rejected then restarted and authentication requested again due to
reason as displayed with explanation.

Data:

(1) reason (2) explanation.

Severity: Error
Log:

LOG_SECURITY

Action:

Software driver Error. If this issue persists, report errors to the Technical Support.

Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)