Dell Emulex Family of Adapters - Manual (Page 414)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Personality Change Commands
414
ShowPersonalities
This command displays the list of single personalities available on an adapter. The
personality type is displayed as either NIC, NIC + RoCE, iSCSI, or FCoE.
Notes

If the active configurations are not single personality, the active personality
indicators are not displayed.

The available personalities are adapter dependent.

RoCE is only available on Windows operating systems.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ShowPersonalities
Parameters
Example
For non-ESXi hosts:
hbacmd ShowPersonalities 00-12-34-56-78-9A
For ESXi hosts:
hbacmd h= m=cim u=root p= n=
ShowPersonalities 00-12-34-56-78-9A
For adapters that include RoCE:
>hbacmd showpersonalities 00-00-c9-12-34-56
Adapter Personalities:
NIC
NIC+RoCE
iSCSI
FCoE (active) (configured)
WWPN
The WWPN of an FCoE port.
MAC
The MAC address of a NIC, NIC + RoCE or iSCSI port.