Dell Emulex Family of Adapters - Manual (Page 1619)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
10. Configuring and Managing iSCSI Targets with the iSCSISelect Utility
Managing an iSCSI Target
1619
Pinging a Target
To ping a target:
1. From the Controller Configuration menu, select iSCSI Target Configuration and
press .
2. Select Add/Ping iSCSI Target or Edit/Ping iSCSI Target and press . The
“iSCSI Target IP Address” is the address that will be pinged.
3. From the Add/Ping iSCSI Target dialog box (Figure 10-2) or the Edit/Ping iSCSI
Target dialog box (Figure 10-6), select Ping and press .
If the ping is successful, you are notified that the ping is successful. Figure 10-9 is an
example of a successful ping.
Figure 10-9 Successful Ping Screen
If the ping is unsuccessful you receive a failed message. There are several reasons
for an unsuccessful ping. For more information see “Troubleshooting for the iSCSI
Protocol” on page 1715.
Viewing Advanced Target Properties
After you have logged into a target, you can view more information about that target.
To view more information about the target, from the Edit/Ping iSCSI Target dialog
box, select the Advanced option and press . Advanced information is
displayed.
Figure 10-10 Advanced Target Properties Screen