Dell Emulex Family of Adapters - Manual (Page 1591)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
6. Using the FCoE Boot BIOS Utility for x86 and x64 Architectures
Configuring Advanced Adapter Parameters
1591
Figure 6-19 Enable or Disable Start Unit Command Screen
3. Select whether to enable or disable the start unit command.
4. Press to select the change.
5. Press to return to the advanced adapter configuration menu.
6. For changes to take effect, reboot the system.
Enabling or Disabling the Environment Variable
Sets the boot controller order if the system supports the environment variable. The
default setting is disabled.
To enable or disable the environment variable:
1. From the main configuration menu (Figure 6-2), select Configure Advanced
Adapter Parameters and press . The adapter configuration menu is
displayed (Figure 6-13).
2. Select Enable or Disable Environment Variable and press . The
Environment Variable configuration screen is displayed.
Figure 6-20 Enable or Disable Environment Variable Screen
3. Select whether to enable or disable the environment variable.
4. Press to select the change.
5. Press to return to the advanced adapter configuration menu.
6. For changes to take effect, reboot the system.