Dell Emulex Family of Adapters - Manual (Page 695)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
FC/FCoE Error and Event Logs
695
Error Codes Tables
Severe Errors
Table A-1 Severe Errors
Bits 0 – 7 Interpretation
0x00 Invalid link speed selection (SLI2-3 mode)
0x01 READ_REV failed (SLI2-3 mode)
0x02 Invalid adapter type (LightPulse)
0x03 Invalid adapter type (LightPulse)
0x04 CONFIG_PORT failed
0x06 READ_CONFIG_failed
0x07 CONFIG_RING 0 failed
0x08 CONFIG_RING 2 failed
0x09 CONFIG_RING 1 failed
0x0A CONFIG_RING 3 failed
0x0B INIT_LINK failed (SLI2-3 mode)
0x0C INIT_LINK failed (SLI2-3 mode)
0x0D READ_REV failed (SLI2-3 mode)
0x0E Invalid adapter type (LightPulse)
0x0F Invalid adapter type (LightPulse)
0x10 CONFIG_PORT failed (reinitialization)
0x12 READ_CONFIG command failed (reinitialization)
0x13 CONFIG_RING 0 failed (reinitialization)
0x14 CONFIG_RING 1 failed (reinitialization)
0x15 CONFIG_RING 2 failed (reinitialization)
0x16 CONFIG_RING 3 failed (reinitialization)
0x17 Unresponsive adapter port (SLI2-3 mode)
0x1C Firmware trap: info1 (SLI2-3 mode)
0x1D Firmware trap: info2 (SLI2-3 mode)
0x1E Over-temperature error condition (LightPulse)
0x1F Firmware-initiated adapter port reset (LightPulse)
0x20 Adapter port error attention (LightPulse)
0x22 Over-temperature warning (LightPulse)
0x23 Returned to safe temperature (LightPulse)
0x24 Invalid response tag (SLI2-3 mode)