Dell Emulex Family of Adapters - Manual (Page 1691)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1691
Discovering Targets Using the iSNS Server
To configure targets using the iSNS server, from the iSNS Configuration screen
(Figure 12-22), select the iSNS server under the Available Servers list and press
.
Figure 12-28 iSNS Server Options Screen
The iSNS server IP and TCP port information is displayed.
The following iSNS server options are available on this screen:

Ping Server – select this option to check connectivity to the server.

Discover Targets – select this option to display a list of targets available on the
iSNS server.
One or more targets can be added by logging into the targets individually. All
added targets are listed under Discovered Targets on the iSCSI Target
Configuration screen (Figure 12-22).

Remove Server – select this option to remove the server from the Available
Servers list.
Note: This only removes the server and not the targets added by this server. To
remove the targets, select the target from the Discovered Targets list
under the iSCSI Target Configuration screen (Figure 12-22), select
Delete Target, and press .