Dell Emulex Family of Adapters - Manual (Page 917)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
917
0582: Error during sgl post operation
The SGL post operation failed.
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_IP verbose
Action: None required.
0602: Failed to allocate CQ_EVENT entry
Failed to allocate a CQ_EVENT entry.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0603: Invalid work queue CQE subtype (x%x)\n", cq-
Invalid work queue CQE.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0700: Bus Reset on target failed
The bus reset for the specified target failed.
Data: None
Severity: Error
Log:
LOG_FCP
Action: None required.
0704: At limitation of preallocated command buffers
The maximum number of command buffers have already been allocated.
Data: None
Severity: Warning
Log:
LOG_FCP verbose
Action: None required.
0705: Allocation request of command buffers will exceed max of
. Reducing allocation request to
The number of command buffers requested will exceed the maximum so a smaller quantity will be
allocated.
Data: None
Severity: Warning
Log:
LOG_FCP verbose
Action: None required.
0708: Allocation request of command buffers did not succeed.
Allocated buffers.
The allocation request for the specified command buffers did not succeed. However, the specified
number of buffers has been allocated.
Data: None
Severity: Warning
Log:
LOG_FCP
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)