Dell Emulex Family of Adapters - Manual (Page 1194)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
5. Managing Hosts
Setting Driver Parameters for All Adapters in a Host
1194
Viewing Firmware Information for All Adapters in a Host
For updating firmware, see “Updating Firmware on Adapters in a Host” on page 154.
The host Maintenance tab enables you to view and update firmware on multiple
adapters in a specific host.
To view firmware for all adapters in a host:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. Select the Maintenance tab.
Figure 5-3 Host Maintenance Tab
Host Maintenance Tab Field Definitions

Adapter – The model of the adapter.

Port – The port WWN.

Active FW Version – The current firmware on the adapter.

Flash FW Version – The flashed firmware on the adapter. Shows n/a for FC
ports.
Host Maintenance Tab Buttons

Update Firmware – Click to update firmware on the selected adapter.
Setting Driver Parameters for All Adapters in a Host
To change the driver parameters for all adapters in a host:
1. From the vSphere console tree-view, select the host whose adapter driver
parameters you want to change and select the Emulex OneCommand tab.
2. Select the host Driver Parameters tab. If there are adapters with different driver
types installed, the Installed Driver Types menu shows a list of all driver types and
driver versions that are installed. Select the driver whose parameters you want to
change. This menu does not appear if all the adapters are using the same driver.