Dell Emulex Family of Adapters - Manual (Page 1353)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1353
Parameters
getfipparams
Syntax
elxvcpcmd.exe v= u= p=
h= getfipparams
Description
This command shows the FCoE Initialization Protocol (FIP) parameters of the UCNA in
FCoE mode.
Parameters
getinitiatorproperties
Syntax
elxvcpcmd.exe v= u= p=
h= getinitiatorproperties
Description
This command shows all the initiator login options for the specified port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.