Mailbox events (0300 - 0339) – Dell Emulex Family of Adapters User Manual
Page 1052

Emulex Drivers Version 10.2 for VMware ESXi User Manual
P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1052
Mailbox Events (0300 - 0339)
elx_mes0300: LATT: Cannot issue READ_LA: Data:
DESCRIPTION: The link attention handler could not issue a READ_LA mailbox
command.
DATA: None
ACTION: None required.
elx_mes0303: Ring
then rsp ring
DESCRIPTION: The port rsp ring put index is larger than the size of the rsp ring.
DATA: None
ACTION: This error could indicate a software driver, firmware or hardware issue.
Report these errors to Emulex technical support.
elx_mes0304: Stray mailbox interrupt, mbxCommand
mbxStatus
DESCRIPTION: Received a mailbox completion interrupt and there are no outstanding
mailbox commands.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. If the issue persists,
report the error to Emulex technical support.
elx_mes0306: CONFIG_LINK mbxStatus error
DESCRIPTION: The driver issued a CONFIG_LINK mbox command to the adapter
that failed.
DATA: None
ACTION: This error could indicate a firmware or hardware issue. Report these errors to
Emulex technical support.
elx_mes0310: Mailbox command
DESCRIPTION: A mailbox command was posted to the adapter and did not complete
within 30 seconds.
DATA: (1) hba_state, (2) sli_flag, (3) mbox_active
ACTION: This error could indicate a software driver or firmware issue. If no I/O is
going through the adapter, reboot the system. If the issue persists, report the error to
Emulex technical support.