Dell Emulex Family of Adapters - Manual (Page 1380)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1380
Example:
elxvcpcmd v=12.345.678.901 u=username p=password h=12.345.678.123
setdumpdirectory 10:00:00:00:c9:61:f2:64 vcenter-datastore
This example shows the dump directory set to /vmfs/volumes/vcenter-datastore.
setfipparams
Syntax
elxvcpcmd.exe v= u= p=
h= setfipparams
Description
This command sets the FIP parameters of the adapter in FCoE mode.
Parameters
Example:
elxvcpcmd v=12.345.678.901 u=username p=password h=12.345.678.123
setfipparams 10:00:00:00:c9:5b:3a:6d fcmap 0x0efc99
setexpresslanelunstate (LPe16000–Series and OCe15100–
Series Only)
Syntax
setexpresslanelunstate
Description
This command enables and disables ExpressLane on a particular LUN.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
Param
FIP parameter name (pfabric, pswitch, vlanid, fcmap and cinvlanid).
Value
FIP parameter value and the valid range for the FIP parameter.
pfabric – 8 byte fabric name (format XX:XX:XX:XX:XX:XX:XX:XX)
pswitch – 8 byte switch name (format
XX:XX:XX:XX:XX:XX:XX:XX)
vlanid – 2 byte VLAN ID [0-4095] OR 'any' for any valid VLANID
fcmap – 3-byte FC_map, 0x0EFCxx
cinvlanid – 2-byte VLAN_ID [0-4095]