Dell Emulex Family of Adapters - Manual (Page 341)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Boot Commands
341
GetBootParams
This command shows the FC boot parameters. If any arguments are missing or invalid,
a suitable error is reported. If all arguments are correct, the data is displayed in tabular
form.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetBootParams
Parameters
SetBootParam
This command changes the FC boot parameters. You can change adapter parameters
and boot device parameters for x86, OpenBoot, and UEFI boot.

When changing adapter parameters, omit the BootDev keyword and value;
otherwise, an error is reported.

When changing boot device parameters for OpenBoot, omit the BootDev
keyword and value; otherwise, an error is reported.

For boot device parameters for x86 or UEFI, you must provide the BootDev
keyword and value.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
SetBootParam [BootDev ]
Parameters
WWPN
The WWPN of an FC port.
Type
X86, OpenBoot, or UEFI.
WWPN
The WWPN of an FC port.
Type
Possible values are x86, OpenBoot, or UEFI.
Param
The parameter name.
Value1
The parameter value.
BootDev
The boot device.
Value2
The boot device entry number: 0–7.