Dell Emulex Family of Adapters User Manual
Page 925
Emulex Drivers Version 10.2 for Linux User Manual
P010081-01A Rev. A
4. Troubleshooting
Log Messages
925
1053: Start Authentication: Security service offline
The authentication failed because security service was unavailable.
Data:
None
Severity: Error
Log:
LOG_SECURITY
Action:
Software driver Error. If this issue persists, report errors to the Technical Support.
1055: Authentication parameter is disabled, but is required by the fabric
FLOGI failed because the fabric has indicated that authentication is required, but authentication has
not yet been configured or enabled on the HBA.
Data:
None
Severity: Error
Log:
LOG_SECURITY
Action:
Configure authentication on this HBA.
1057: Authentication transaction reject. reason
An authentication was rejected and requested again due to the reason as displayed with the
explanation.
Data:
(1) reason (2) explanation.
Severity: Error
Log:
LOG_SECURITY
Action:
Software driver Error. If this issue persists, report errors to the Technical Support.
1058: Waiting for authentication service
There was a delay when the authentication service was not initially available as expected.
Data:
None
Severity: Warning
Log:
LOG_SECURITY
Action:
Software driver warning. If this issue persists, report these errors to Technical Support.
1059: Authentication became available
The authentication service came online but was not initially available as expected.
Data:
None
Severity: Warning
Log:
LOG_SECURITY
Action:
Software driver warning. If this issue persists, report these errors to Technical Support.
1201: Failed to allocate dfc_host
Failed to allocate memory for the dfc_host_struct.
Data:
None
Severity: Error
Log:
LOG_ELS
Action:
None required.
1210: Invalid cmd size: cmd
The management command for LPFC 2100 has failed.
Data:
None
Severity: Error
Log:
LOG_LIBDFC
Action:
None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)