Dell Emulex Family of Adapters - Manual (Page 1179)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
3. Using OneCommand Manager for VMware vCenter
vSphere Console Views
1179
Note: The User Preferences window logs only up and down events for the
port. Other events, such as temperature, are not posted.
The difference between the two views is the Emulex Device Management area which
may contain options or a tree-view. In a cluster view you can view fabric-centric or
host-centric information about all the hosts in a cluster. Figure 3-1 shows the Emulex
Device Management options available in a host-centric cluster view. You can perform
active management simultaneously on a fabric or group of hosts belonging to a cluster.
In a host view you can only view information about a single host. Figure 3-2 shows the
Emulex Device Management tree-view elements for a selected host. In the host view, in
addition to selecting an element in the tree-view, you must also select a tab in the
information pane to view the information for the element selected in the tree-view.
Notes:

A host can be managed by only one vCenter Server at a time.

The OneCommand Manager for VMware vCenter user interface is auto
refreshed every five minutes.
Figure 3-1 Host-Centric Cluster View