Dell Emulex Family of Adapters - Manual (Page 70)

OneCommand™ Manager Application P010066-01A Rev. A
2. Installing and Uninstalling OneCommand Manager Application Components
Installing the OneCommand Manager Application Web Launch Interface
70
Installing the OneCommand Manager Application
Web Launch Interface
Note: The OneCommand Manager application Web Launch Interface is not supported
on VMware ESXi Server.
Note: OneCommand Manager Secure Management mode is not supported for
OneCommand Manager application Web Launch clients.
In addition to the driver and OneCommand Manager application, the following
prerequisites must be met before you install the Web Launch Interface.
Requirements
In Windows

Microsoft Internet Information Services (IIS) Server must be installed. See the
Microsoft website for information on downloads and installation.

The Windows Firewall may be enabled by default. If it is, you must add and
enable three exceptions: HTTP port, java.exe, and rmiregistry.exe.
Note: Allowing programs or ports through the firewall may increase the
security risks. Use at your own discretion.
To enable the HTTP port:
1. Click Add Port... The Add a Port dialog box is displayed.
2. On the Add a Port dialog box, type
HTTP as the Name and 80 as the Port Number.
3. Leave TCP enabled and click OK.
To enable the java.exe program:
1. Click Add Program... The Add a Program dialog box is displayed.
2. Click Browse...
3. Specify java.exe located in the OneCommand Manager JRE installation path. For
example:
C:\Program Files\Emulex\util\JRE\bin\java.exe
.
4. Click OK.
To enable the rmiregistry.exe program:
1. Click Add Program...The Add a Program dialog box is displayed.
2. Click Browse... and specify the rmiregistry.exe located in the OneCommand
Manager JRE installation path. For example:
C:\Program Files\Emulex\util\JRE\bin\rmiregistry.exe.
3. Click OK.
4. Click OK to apply the new firewall settings.