beautypg.com

Configure boot parameters, Change the device path, Configure boot parameters 0 – Dell Emulex Family of Adapters User Manual

Page 1450: Figure 6-14

background image

Boot for the Fibre Channel Protocol User Manual

P010096-01A Rev. A

6. EFIBoot

Configure Boot Parameters

1450

Configure Boot Parameters

The EFI utility enables you to configure the following boot parameters:

Device path

Maximum LUNs per target

Boot target scan

Boot devices

Delay device discovery

To configure boot parameters:

From the EFI – BIOS Setup Utility menu (Figure 6-6), select 3. Configure Boot

Parameters and press . The menu shown in Figure 6-14 is displayed.

Figure 6-14 Boot Configuration Menu

Change the Device Path

This option allows you to make the FC driver appear as a SCSI driver. This is useful for

older systems that do not have native support in the EFI system firmware or boot code

for FC device paths.

See also other documents in the category Dell Computer hardware: