Dell Emulex Family of Adapters - Manual (Page 163)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
iSCSI
163
Note: Not all adapters support two PFC priorities. Adapters that do not
support two PFC priorities display an error message if you try to
configure more than one PFC priority.
3. The priority group to which the FCoE priority is assigned must contain no
other priorities.
4. The additional PFC priority must be assigned to a priority group which has
no other priorities.
5. Bandwidths of all the priority groups must add up to 100%.

OK – Click to apply and save your changes.

Cancel – Click to discard any changes you made.
iSCSI
Viewing iSCSI Port Information
When you select an iSCSI port from the discovery-tree, the iSCSI Port Information tab
contains general attributes associated with the selected iSCSI adapter. If the adapter
supports vNIC, vNIC data is also displayed.
Note: iSCSI port information is not displayed by the CIM Provider on any version of
VMware ESXi.
Note: vNIC is supported only on IBM virtual fabric adapters. For specific information
as to whether it is supported on a specific adapter, see the release notes that are
available on the IBM adapter pages on the Emulex website.
To view iSCSI port information:
1. Select Host or Fabric view.
2. Select an iSCSI port in the discovery-tree.