Dell Emulex Family of Adapters - Manual (Page 1674)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring the Network
1674
Configuring the IPv6 Address
To configure the IPv6 address:
1. On the Configure IPV6 Address screen (Figure 12-10), select Configure IPV6
Address and press . The Configure IPV6 Address screen appears.
Figure 12-11 Configure IPV6 Address Settings Screen
2. Enter the link local address, IPv6 address, routable address 1, routable address 2,
and default gateway address in the corresponding fields.
3. Press to exit the menu.
Pinging the iSCSI Initiator
To ping the iSCSI initiator, on the Configure IPV6 Address screen (Figure 12-10), select
Ping and press .

If the ping is successful, a reply message is displayed with the iSCSI initiator IP
address.

If the ping is not successful, a failure message is displayed.